<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=US-ASCII" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 9.00.8112.16457"></HEAD>
<BODY style="FONT-FAMILY: Arial; COLOR: #000000; FONT-SIZE: 10pt" id=role_body
bottomMargin=7 leftMargin=7 rightMargin=7 topMargin=7><FONT id=role_document
color=#000000 size=2 face=Arial>
<DIV>In a message dated 1/29/2013 1:11:37 A.M. Eastern Standard Time,
elvisleft_bldg@comcast.net writes:</DIV>
<DIV>
<BLOCKQUOTE style="PADDING-LEFT: 10px; MARGIN-LEFT: 10px">
<DIV><FONT style="BACKGROUND-COLOR: transparent" color=#000000 size=2
face=Arial>it seems like nobody has popout seals.. the price with CIP1 bob is
very close to ISP west. However ISP west has cal look for 99.00 the whole set.
I have heard discouraging words about seals today from my local shop ,
especially about the rear hatch seal being almost too loose and the windshield
seal not fitting properly on a 73 tho... </FONT></DIV>
<DIV> </DIV>
<DIV>Pop out seals for a Square and a Notch are the same, and are available
thru most of the good parts suppliers. The Fastback pop out seal was only
available thru ISP, but I don't know IF they made another run on them. The ISP
Cal Look seals seem a little short on the flap (body side) of the
opening, along with the glass side as well (my experience with them). However,
the Cal Look seals sold by CIP are WCM seals, and fit very well. I've got
a Cal Look windshield seal here from ISP that I can't use, because it was
made too long. It came in 1 of their kits. I just replaced it with a used
WCM Cal Look seal, and went on my way. I also replaced that WCM Cal
Look seal with another, that had been in storage for 4 years, and it fit like
it was supposed to, even with an aftermarket windshield. :O Just my take on
them.
<DIV> </DIV>
<DIV><FONT lang=0 size=2 face=Arial FAMILY="SANSSERIF" PTSIZE="10">Bob 65
Notch S w/Sunroof and IRS aka Krusty<BR>64 T-34 Ghia aka Wolfie<BR>71
Square-vert under
construction</FONT></DIV></DIV></BLOCKQUOTE></DIV></FONT></BODY></HTML>