<table cellspacing="0" cellpadding="0" border="0" ><tr><td valign="top" style="font: inherit;">I wanted to replace by 009 distributor with a stock one and it appears to be off 180 degrees, ie at number 1 TDC the small "half" is lined up at 60 degrees.  and as a result I there is no room for  distributor with the vacumn advance. Can I remove the distributor drive gear at TDC  #1 and reinsert it at TDC #3 so that the larger half is aligned correctly at 60 degrees or should I just leave well enough alone? hope this makes sense. kk</td></tr></table>