<div dir="ltr">I'm even later than Bob in replying here, but FWIW, I tried the cut, splice, and glue method on a Type 1 window a few years ago and it hasn't held. I found that there's just too much pressure on the seal at the areas I had to cut and after a while the ends separated and became leak sources. I've just spent a few hours over the last few days prepping a fresh window and frame.<div>
<div><div><br></div><div>I found a supplier for the OEM round headed rivet and fiber washer here</div><div><br></div><div><a href="https://bugcity.com/shop/shop.htm?pquery=rivet+vent">https://bugcity.com/shop/shop.htm?pquery=rivet+vent</a><br>
</div><div><br></div><div>Only issue is that no one sells the round bottom part that receives the rivet. Using a 5/32" drill bit, I was able to drill through the bottom mount to remove the rivet without widening the hole much if any and test fitting so far looks and feels good. For riveting, I intend to use the Fastenal tool someone else linked to but I've got to find a BB or similar to complete the job. </div>
<div><br></div><div>If all that fails, I'm sure there's a machine screw and nut small enough to do the job without looking too shabby. </div><div><div><br></div><div><br></div></div></div></div></div><div class="gmail_extra">
<br><br><div class="gmail_quote">On Sun, Sep 15, 2013 at 10:02 AM,  <span dir="ltr"><<a href="mailto:Bobsnotch@aol.com" target="_blank">Bobsnotch@aol.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
In a message dated 9/6/2013 7:09:49 P.M. Eastern Daylight Time,<br>
<a href="mailto:dlstiefel@dekalbk12.org">dlstiefel@dekalbk12.org</a> writes:<br>
<br>
<br>
Yea that's what I figured.  I could cut a slit on the part of  the seal<br>
facing inside then after it's together put some Permatex black RTV  to seal<br>
that back.<br>
<br>
Sorry I'm late to the party, but I'd go that route, and super glue the<br>
splice. Use Loctite 404 for gluing it back together.<br>
<br>
Bob 65  Notch S w/Sunroof and IRS aka Krusty<br>
64 T-34 Ghia aka Wolfie<br>
71  Square-vert under  construction<br>
<br>
<br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <<a href="http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20130915/f6a6e06a/attachment.htm" target="_blank">http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20130915/f6a6e06a/attachment.htm</a>><br>

_______________________________________________<br>
VWType3.Org mailing list - <a href="mailto:type3@vwtype3.org">type3@vwtype3.org</a><br>
<a href="http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org" target="_blank">http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org</a><br>
Contact <a href="mailto:gregm@vwtype3.org">gregm@vwtype3.org</a> if you need help with the list.<br>
</blockquote></div><br></div>