<div dir="ltr"><div>My car ('72 FI Squareback) had been running noticeably hotter lately and started leaking a little oil from the valve cover gaskets (probably due to excessive heat), so I decided to check my valves while I was replacing the valve cover gasket.  It had been ~ 1500 miles since the last time I checked/adjusted my valves.  Each of my intake valves was still .006, but each of the exhaust valves (on all 4) were tight.  Tight as in practically no clearance.<br>
<br></div><div>The fact that there was no clearance on any of my exhaust valves was a bit concerning to me.  I was able to adjust them all to get .006 again, but I'm still a bit spooked out.  What could have caused these to get so out of whack in such a short time and does this indicate a more severe problem?<br>
<br></div><div>Is there anything else I can do to further diagnose this issue or should I just keep driving it and see what happens?</div><div><br></div><div>Thanks,<br><br></div><div>Jacob<br></div><div><div><div><br><br>
</div></div></div></div>