<div dir="ltr"><br><div class="gmail_extra"><div class="gmail_quote"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div class="im">
> On Thu, Jan 30, 2014 at 7:22 AM, Jim Adney <<a href="mailto:jadney@vwtype3.org">jadney@vwtype3.org</a>> wrote:<br>
><br>
> > Were you the one who said he had some correct OG heads and that this<br>
> > car was a '73? If so, this would be a good time to get them freshened<br>
> > up and ready to install, regardless.<br>
> ><br>
> That is correct except I have a '72.  The heads currently on the engine are<br>
> Brazilian universal heads (with the tap for FI).  I have 3 sets of OG '72<br>
> heads.  Although, I just noticed last night that of the 3 sets, I have 4<br>
> heads with a FI sensor tap (same casting # too), and 2 without -- so it<br>
> looks like I have 4 3/4 heads and 2 1/2 heads.  So long as I have a FI<br>
> sensor tap on the correct side, the heads are interchangeable left for<br>
> right, correct?<br>
<br>
</div>Okay, '72 & '73 heads are the same, so you're set up just fine.<br>
Having an extra with the temp sensor port is a blessing. It will work<br>
on the right just fine, but you should hold on to it, because nothing<br>
else will work correctly on your left. If you end up with a good<br>
extra pair of those heads, the ones with the vent ports, I'd buy them<br>
from you someday. They are hard to find.<br>
<div class="im"><br></div></blockquote><div><br></div><div>I am fortunate to have purchased my car with the original engine (which had thrown a rod) and a spare engine (from a donor 1972).  I also lucked out in finding another original 1972 engine from a local salvage yard.  I have no need for all these parts, so once I get a good set of heads rebuilt for my engine, I'd be happy to sell the remaining good stock.  These are the kinds with the vent ports in the heads and I'm excited to get these back on my car.  Some year I hope to lug most of my duplicate parts to a T3 Invasion for sale/swap.<br>
</div><div><br> </div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div class="im">
> > > The last time I checked, I had 14 volts at idle at the battery and maybe<br>
> > > 14.2 at mid/high RPM.  I could not get it any higher even with increasing<br>
> > > revs.  I have not done anything to the generator since I took it from the<br>
> > > old engine and put it on the new one in 1997.<br>
> ><br>
> > The voltage at idle is irrelevant, but the 14.2 V indicates that your<br>
> > charging system is working nicely, assuming you would still get that<br>
> > same number today.<br>
> ><br>
> Great.  That measurement was this past fall (~ 3 months ago).  I can check<br>
> again, but I don't suspect it to have changed drastically.<br>
<br>
</div>It's worth checking again, because it can change quickly, once the VR<br>
starts to wear out.<br>
<div class="HOEnZb"><div class="h5"><br></div></div></blockquote></div><br></div><div class="gmail_extra">Good to know.  I'll check it now while I have the engine in the car and running.  <br></div><div class="gmail_extra">
<br><br></div></div>