<div dir="ltr"><div><div><div>Hi,<br></div>The notch I bought has the Empi rear disk brake kit on it.  Not too fond of the Ford Taurus rear calipers so would like to swap them out and use Porsche 914 rear calipers to take advantage of the parking brake.  The EMPI kit I have has a cast bracket but the hole spacing is 3.75" which is 3/4" too wide.  Where does one source a caliper bracket so this would be possible?  <br>

<br></div>Might was well do the fronts and swap out the 66-71 calipers to the 72-73 spindles/calipers to use the stock brakes to match the (new) rears.  Anyone have a line on the 72-73 spindles?<br><br></div>Any ptrs appreciated.<br>

</div>