<table cellspacing="0" cellpadding="0" border="0"><tr><td valign="top"><p dir="ltr">Crew,</p>
<p dir="ltr">I am slowly getting together the parts for my type 4 build. The case is getting align bored now. I have found a set of 2.0 crank and rods. I have also found another 1.8 head to go with the one I got with the engine.</p>
<p dir="ltr">Now I need to start deciding on a cam. Here are the specs,</p>
<p dir="ltr">96mm piston and cylinder set.<br>
Dell 40's <br>
8-8.5 compression for pump gas use<br>
Stock 1.8 heads<br>
71mm stroke with stock rods<br>
All inside my automatic squareback at around 2200 lb.<br>
It does have a type 4 torque converter in it. I don't know if the stall is the same between type 3 and 4.</p>
<p dir="ltr">Most recommendations have been for a web 73 or 494. I just don't know enough to make an informed decision. I am looking for low end torque and longevity. I'm not interested in racing or going 100 mph. 22 mpg + would also be nice. All brands will be considered.</p>
<p dir="ltr">Adam</p>
</td></tr></table>