<p dir="ltr">It is running like this now. I may even throw the 009 I have in the garage back in for now. What we found yesterday, much like with only having one port drilled and tapped for the automatic, is that the vacuum signal is all over the place.</p>

<p dir="ltr">We just disconnected the vacuum can and set the timing at 35 degrees total advance and let the low end fall where it wanted. Before anyone freaks out, at this elevation we get the advantage of running more timing without rattling it apart.</p>

<p dir="ltr">Adam</p>
<div class="gmail_quote">On Jun 11, 2014 11:23 PM, "Daniel K. Du Vall" <<a href="mailto:dduvall@1peter4-10.org">dduvall@1peter4-10.org</a>> wrote:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
I would try what Jim suggested run it without the vacuum advance. Most every setup of Dellorto carb I have seen including my 45s I ran on my bug used a 009 or one of the MSD.<br>
<br>
-----Original Message-----<br>
From: <a href="http://type3-vwtype3.org" target="_blank">type3-vwtype3.org</a> [mailto:<a href="mailto:type3-vwtype3.org-bounces@lists.vwtype3.org">type3-vwtype3.org-bounces@lists.vwtype3.org</a>] On Behalf Of Craigs List<br>

Sent: Wednesday, June 11, 2014 11:44 PM<br>
To: Type 3 List<br>
Subject: Re: [T3] New Distributor Same Results, 034<br>
<br>
A few questions;<br>
<br>
1) Am I the first person in the history of type 3's to use dellorto carbs on an automatic?<br>
<br>
2) what is the stall of a type 4 torque converter vs a type 3? Or are they the same?<br>
<br>
3) how does one get a clean vacuum signal from Dell's to the vacuum advance?<br>
<br>
Adam<br>
 On Jun 11, 2014 7:29 PM, "Jim Adney" <<a href="mailto:jadney@vwtype3.org">jadney@vwtype3.org</a>> wrote:<br>
<br>
> On 11 Jun 2014 at 20:58, Keith Park wrote:<br>
><br>
> > Just a thought, have you tried adjusting the accelerator pump stroke?<br>
> > I had to do that to get the last little stumble out of the Crate<br>
> > with the Ethanol.<br>
><br>
> And maybe start by verifying that the accel pump is actually working.<br>
><br>
> --<br>
> *******************************<br>
> Jim Adney, <a href="mailto:jadney@vwtype3.org">jadney@vwtype3.org</a><br>
> Madison, Wisconsin, USA<br>
> *******************************<br>
><br>
> _______________________________________________<br>
> VWType3.Org mailing list - <a href="mailto:type3@vwtype3.org">type3@vwtype3.org</a><br>
> <a href="http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org" target="_blank">http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org</a><br>
> Contact <a href="mailto:gregm@vwtype3.org">gregm@vwtype3.org</a> if you need help with the list.<br>
><br>
-------------- next part --------------<br>
An HTML attachment was scrubbed...<br>
URL: <<a href="http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20140611/ad587ead/attachment.htm" target="_blank">http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20140611/ad587ead/attachment.htm</a>><br>

_______________________________________________<br>
VWType3.Org mailing list - <a href="mailto:type3@vwtype3.org">type3@vwtype3.org</a> <a href="http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org" target="_blank">http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org</a><br>

Contact <a href="mailto:gregm@vwtype3.org">gregm@vwtype3.org</a> if you need help with the list.<br>
_______________________________________________<br>
VWType3.Org mailing list - <a href="mailto:type3@vwtype3.org">type3@vwtype3.org</a><br>
<a href="http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org" target="_blank">http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org</a><br>
Contact <a href="mailto:gregm@vwtype3.org">gregm@vwtype3.org</a> if you need help with the list.<br>
</blockquote></div>