<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=US-ASCII" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 8.00.6001.23588"></HEAD>
<BODY style="FONT-FAMILY: Arial; COLOR: #000000; FONT-SIZE: 10pt" id=role_body
bottomMargin=7 leftMargin=7 rightMargin=7 topMargin=7><FONT id=role_document
color=#000000 size=2 face=Arial>
<DIV>In a message dated 10/14/2014 10:53:19 A.M. Pacific Daylight Time,
alluringeyewear@comcast.net writes:</DIV>
<BLOCKQUOTE
style="BORDER-LEFT: blue 2px solid; PADDING-LEFT: 5px; MARGIN-LEFT: 5px"><FONT
style="BACKGROUND-COLOR: transparent" color=#000000 size=2 face=Arial>Hello
all! I am just starting to repair my floor pans. The front
sections look good and are very solid the backs need replacing. Are
there any other VW pans that would work or do I have do look for type 3
pans? I would change the drivers front section if it were inexpensive,
if not I can weld the few small holes. </FONT></BLOCKQUOTE>
<DIV> </DIV>
<DIV>Most people are using Gerson full length pan halfs, or ISP pan sections. If
you're up for a challenge, you can use T-1 Ghia floor pans, but they're not a
direct replacement. My understanding is that you'll need to re-use the outer lip
(bolt section) from your old T-3 pans, and trim off that area from the Ghia
pans.</DIV>
<DIV>I hope this helps.
<DIV> </DIV>
<DIV><FONT lang=0 size=2 face=Arial FAMILY="SANSSERIF" PTSIZE="10">Bob 65 Notch
with Sunroof</FONT></DIV></DIV></FONT></BODY></HTML>