<div dir="ltr"><div>I am in the process of rebuilding the engine in my 1972 Square.  I located a nice pair of heat exchangers from a local scrap yard, and had them blasted and ceramic coated--they look beautiful.<br><br></div><div>My old heat exchangers had the insulation on them, with two metal tins (one along the bottom, and one along the curved part) over the outside of the insulation, with everything held on by a series of metal straps.<br><br></div><div>I'm leaning towards not putting the insulation back on.  I understand that after 1973, VW quit putting insulation on these anyway.  My insulation is pretty nasty (oil soaked, torn, etc) and if I can get by without it, I think I would like to.  What is the collective wisdom on foregoing the insulation?  If climate makes a difference, I live in Northern California.  Is there any modern replacement?<br><br></div><div>Next, assuming I forgo the insulation, should I still put on the two metal tin pieces on each side?  Are there any vendors that still sell the original (or similar) clamps?  I'd rather not use  generic spiral-tooth hose clamps if I can find something similar to the original look.<br><br></div><div>Once I get some time, hopefully this weekend, I'll post pictures of my progress to-date and send a link to the gallery.<br></div><div><br></div><div>Thanks in advance,<br><br>Jacob<br></div></div>