<div dir="ltr">Crew,<div><br></div><div>I have always had the bouncing needle in my Square. Extra grounds and such never helped. I found a different 12v gauge at a swap meet today. I pop it in and I have the exact same issues.</div><div><br></div><div>I start looking elsewhere.</div><div><br></div><div>As I am comparing the wiring back with all the lights that came with the new gauge vs the one wired in the car, I notice a wire missing. BINGO!</div><div><br></div><div>Here is a picture of both units.</div><div><br></div><div><a href="http://one4house.com/images/missingwire.jpg">http://one4house.com/images/missingwire.jpg</a><br></div><div><br></div><div><a href="http://one4house.com/images/wire.jpg">http://one4house.com/images/wire.jpg</a><br></div><div><br></div><div>On the unit that came with the new gauge, I have an extra red wire protruding out of the back of the gauge on the "K" terminal. I do not have this on the one in the car. Where is this wire supposed to be wired? The wiring diagram is not clear. </div><div><br></div><div>Adam</div></div>