<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=UTF-8" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 11.00.9600.17344"></HEAD>
<BODY id=role_body style="FONT-SIZE: 10pt; FONT-FAMILY: Arial; COLOR: #000000" 
bottomMargin=7 leftMargin=7 rightMargin=7 topMargin=7><FONT id=role_document 
color=#000000 size=2 face=Arial>
<DIV>In a message dated 2/14/2016 4:15:29 P.M. Eastern Standard Time, 
phil.hof@ostronic.org writes:</DIV>
<BLOCKQUOTE 
style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: blue 2px solid"><FONT 
  style="BACKGROUND-COLOR: transparent" color=#000000 size=2 face=Arial>Anyone 
  got spare fan shims?  I put in a gasket and one shim, as I had taken 
  those off, but it’s in a new case, so all bets are off.<BR><BR>I used new 
  screws and lactate on the shroud attachment, so I doubt it’s that.  Any 
  other suggestions of why I have something rubbing in the shroud area after my 
  rebuild?<BR><BR>I broke it in for 20 minutes but the rattly scarping noise 
  needs attention.  I didn’t hear or feel anything on the engine stand, but 
  I gotta pull the shroud off and have a listen with a rubber hose during a 
  short engine run.  I can hear it through the fender cooling slots FAR 
  more loudly than above the engine, so I know it’s not bearings and 
  such.<BR><BR>Anyone had fan interference issues?  Did you have to shim 
  the shroud itself?<BR><BR>Lacking the VW tool, I eyeballed the front shroud 
  for concentricity, which always worked for me in the past.<BR><BR>Never had 
  this issue before.<BR><BR>Suggestions welcome!</FONT></BLOCKQUOTE>
<DIV> </DIV>
<DIV><FONT style="BACKGROUND-COLOR: transparent" color=#000000 size=2 
face=Arial>Does the bottom rear? of the shroud clear the oil pump studs? Or the 
oil pump parts themselves? Just asking, as I've had the stud problem before.<BR>
<DIV> </DIV>
<DIV><FONT lang=0 size=2 face=Arial FAMILY="SANSSERIF" PTSIZE="10">Bob 65 Notch 
with sunroof</FONT><FONT lang=0 color=#000000 size=3 face=Arial 
FAMILY="SANSSERIF" 
PTSIZE="12"><BR></FONT></DIV></FONT></DIV></FONT></BODY></HTML>