<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 8.00.6001.23588">
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT size=2 face=Arial> I had a difficult time because the inner tie
rods have the nut that locks the end to the rod and both are one the drop arm .
I need to know what type of wrench I need to get at them. I had to have the
wheels off and reach in over the left side to tighten them .</FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial> I got them loose because I removed both tie
rod with the ends and managed to tighten them with an adjustable wrench . I need
to get them loose again with the wheels on so I can set the toe and center the
steering wheel . I got the toe pretty close but now the steering wheel is 10 *
off to the left before it was 10* off to the right. </FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial> Any idea what VW tool was used or what those
who have done this use? Also what size wrench ? It seems to be either 23 or 24mm
I went by the adjustable wrench and measured it . </FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial> I made a better tool to check the toe at the
inside of the steel rims and plates to set the front wheels on then set the rear
on jack stands . I used a tape measure from the tire center but that is not the
way to do it. It does not pull yet with the wheel off center it has more
play going straight . There is a bit of play in the box most of it was the inner
right tie rod end I had over 2 1/2" of play before replacing the ends , if I
center the wheel there is a bit more than 1" now . </FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial> I just need to know what sort of wrench I
need to get at the tie rod nuts , they are hard to get at and the master cyl is
right there too not to mention the beam . The outers are easy with the clamp and
bolt and nut. </FONT></DIV>
<DIV><FONT size=2 face=Arial></FONT> </DIV>
<DIV><FONT size=2 face=Arial>William</FONT></DIV><br />
<table style="border-top: 1px solid #aaabb6;">
<tr>
<td style="width: 55px; padding-top: 13px;"><a href="https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon" target="_blank"><img src="https://ipmcdn.avast.com/images/2016/icons/icon-envelope-tick-round-orange-v1.png" /></a></td>
<td style="width: 470px; padding-top: 15px; color: #41424e; font-size: 13px; font-family: Arial, Helvetica, sans-serif; line-height: 18px;">Virus-free. <a href="https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link" target="_blank" style="color: #4453ea;">www.avast.com</a>
</td>
</tr>
</table></BODY></HTML>