<div dir="ltr"><div class="gmail_default" style="color:rgb(0,0,0);font-family:georgia,serif;font-size:large">>>Could the painted brackets have "insulated" the ground  connection to the<br> >>body?<br><br> >Yes. The paint created an insulation barrier. This is why a lot of parts<br> >are painted afterward, that are depending on a metal to metal contact for<br> >ground.<br><br><br> >>Since I *rarely* drive the Square at night, I almost never put  the car in<br> >>reverse and back it in the parking space ... when "the air is  dark".  :-)<br><br> >>To test, I will run a (temporary) ground wire from the  bumper to a known<br> >>good, chassis ground.<br><br> >Yes. Maybe with the lift gate open, clip your test lead to the gate latch<br> >(body side).</div><div class="gmail_default" style="color:rgb(0,0,0);font-family:georgia,serif;font-size:large"><br></div><div class="gmail_default" style="color:rgb(0,0,0);font-family:georgia,serif;font-size:large">Bob --</div><div class="gmail_default" style="color:rgb(0,0,0);font-family:georgia,serif;font-size:large">I'm aware some VW parts were painted <u>after</u> assembly.  But I can't see how the bumper brackets-to-body were handled that way.  I'm only familiar with my '69 Square.  </div><div class="gmail_default" style="color:rgb(0,0,0);font-family:georgia,serif;font-size:large">Did the rear aprons on Fasty's and Notch's also have a "slot" to accept the bracket arms being inserted and then bolted up?</div><div class="gmail_default" style="color:rgb(0,0,0);font-family:georgia,serif;font-size:large"><br></div><div class="gmail_default" style="color:rgb(0,0,0);font-family:georgia,serif;font-size:large">Good idea to connect the ground wire to the rear hatch latch on the body side.  I thought about removing a tail light to get to the "good" ground.  My other check will be to check the lock washer and hex nut that mounts the stem of the back up light to the bumper.</div><div class="gmail_default" style="color:rgb(0,0,0);font-family:georgia,serif;font-size:large"><br></div><div class="gmail_default" style="color:rgb(0,0,0);font-family:georgia,serif;font-size:large">I'm sure there's a fairly simple reason.  ???  (fingers crossed) <br clear="all"></div><b></b><br>-- <br><div class="gmail_signature"><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr"><div>Gary "Frito" - '69 Squareback, FI, MT, One-owner<br></div><div>Rockport, TX (winter)</div><div>Lake Geneva, WI (summer)</div></div></div></div></div></div></div>
</div>