<div dir="ltr">I'm having a difficult time getting my cooling flap thermostat to have enough travel to open, or close, the cooling flaps all the way. I've have a new thermostat. I think I have all the correct parts. I've installed and adjusted it according the instructions in the Bently Manual. If I set the bottom edge of the flaps 2mm from the fan housing and heat up the thermostat so that it expands fully the cooling flaps are around 15mm to 20mm from opening fully. Conversly if i set the flaps to full open while the thermostat is fully expanded when the thermostat cools and contracts the flaps are aound 15mm to 20mm from the fan housing. I've tried moving the thermostat bracket up and down but to no avail.<div><br></div><div>Any ideas?</div><div><br></div><div>Thanks,</div><div>Earl</div></div>