<div dir="ltr">In tracing down the various engine hose attachments that I'm need to replace, I've noticed one hose that looks like it should be coming from a port in the top side of the elbow that is connected to left upper heat exchanger. The hose is very brittle and is not actually attached, just positioned above this port. This hose then runs through the front engine tin and connects to the left side of a "canister" that is attached to the underside of the back deck, above the transmission.  On the right side of this "canister" another hose returns back through the front engine tin and, I believe attaches to the port on the right side of the oil bath air cleaner. There is only one port on the right side of the air cleaner so I'm assuming this is where this hose attaches. It has deteriorated such that there is only 1-2 inches of the remaining hose reaching into right side of the engine compartment.<br><div><br></div><div>My questions are:</div><div><br></div><div>1) What is the purpose of this canister?</div><div>2) Is the routing of the hoses correct?</div><div>3) Is there any maintenance required on this canister?</div><div><br></div><div>Thanks,</div><div><br></div><div>Richard Spryer</div><div><br></div><div><br></div></div>