<div dir="ltr">What is the purpose of the foam on top of the oil cooler?<div><br></div><div>I suspect that it takes up the space between the top of the cooler and the upper tin to force air flow through the cooler.</div><div><br></div><div>If that is the case, what materials are acceptable in that location.</div><div><br></div><div>Most of my foam is intact, just worn away at the edges.</div><div><br></div><div>I spied a piece of thick wool felt about the same thickness in my workspace, and was wondering if there is a good reason not to use felt up there. </div><div><br></div><div>Cushions and crushes to fit and is basically inert.</div><div><br></div><div>Jeff</div><div>'67 Sqbk stock</div><div>Nevada City, CA</div></div>