<div dir="auto">Keith<div dir="auto">1st- get the end play in spec.  3 shims, no less than .004.</div><div dir="auto">2nd- a new engine can take several hundred miles to seat the rings and settle in.  Both heat and friction wise.  Especially if you are using performance rings.</div><div dir="auto">3rd-. Is your clutch adjusted correctly this can cause a 'tight' feeling.</div><div dir="auto">4th- pull the plugs when cold and see if it spins more easily.  This isn't a semi-hemi build.</div><div dir="auto">5th- if you have to pull the engine, loosen the flywheel and see if the engine spins easier.  If so, see #1.</div><div dir="auto">6th-. If all else fails, crate that puppy up and ship it to me. (Inset Vader laugh here)<br><br><div data-smartmail="gmail_signature" dir="auto">Brian</div></div></div>