<div dir="ltr"><div dir="ltr"><div>I'm in the process of replacing the old/leaking ball joints on the front suspension and, per Jim Adney's recommendation, I've removed the upper torsion bar to enlarge the set screw dimple on the left end of the torsion bar. While cleaning the dirt/grim away after removing the upper torsion arms, I noticed that the left side thrust ring is beyond the wear limit as described in Bentley. The right side thrust ring's wear grooves are still within spec. Questions:</div><div>1) Where can I find replacement thrust rings?</div><div>2) What type of grease is recommended when lubricating the front axle?</div><div>Thanks,</div><div>-- Richard Spryer</div></div></div>