<div dir="ltr">Once I got the engine to run continuously (previous message) it is on to running issues.<div><br></div><div>I previously set the carbs to the initial setting per the carb book and it sounded good.</div><div><br></div><div>However, when checking with the Uni-Syn they were way out of balance and running too fast at idle.</div><div><br></div><div>I adjusted the highest revving carb, the left, to as low as it could get, and it was still running high.</div><div><br></div><div>I adjusted the air mixture as well and it didn't change to any lower RPMs.</div><div><br></div><div>Now what? I can't adjust the RPM any lower mechanically, and adjusting the air mixture doesn't change things either.</div><div><br></div><div>Jeff '67 stock Sqbk</div><div>Nevada City CA</div></div>