My original (one owner) 1969 FI Squareback Gas Cap has what appears to be a "doughnut-shaped" seal of cork, that seals (or is supposed to seal?) against the "rolled edge" of the metal, fuel filler tube terminus.<div><br></div><div>My problem is that the Gas Cap, which has a raised  "knob" that is used to tighten or loosen the cap 1/4 turn, has become increasingly difficult to turn.</div><div><br></div><div>The cork seal seems to have become so hard that seating it, with the "ears" that are supposed to engage slots in the fuel filler pipe, makes turning the cap nearly impossible for my (non-dominant hand - Jim will understand this) wrist.</div><div><br></div><div>I've considered making a tool to fit over the "knob" to give me more leverage for turning the gas cap.</div><div><br></div><div>Do I need to replace the cork?  Use a thinner piece of cork?  Lubricate the cork? Does the fuel tank need to "breathe" so it injests air to allow the fuel pump to suck the fuel out of the tank and presurize the fuel ring?</div><br><br>-- <br><div dir="ltr"><div><div dir="ltr"><div><div dir="ltr"><div>Gary "Frito" - '69 Squareback, FI, MT, One-owner<br></div><div>Rockport, TX (winter)</div><div>Lake Geneva, WI (summer)</div></div></div></div></div></div><br>