<div dir="ltr"><div> I know once at idle the enrichment is out of the picture simply because of the forked switch the design of the TPS. It's also out of the picture any time you let off the gas since once you do the forked switch breaks the connection to all functions of the enrichment while cruising the forked switch on the enrichment and why if there are worn spots you get bucking. The trigger points are what send the RPM signal to the ECU. I thought the idle pad on the TPS was mainly a function of a signal sent to the ECU similar to what Porsche used when they had knob on the ECU to adjust or fine tune the idle richness. I can see how it cuts off the injectors just not how it does so at specific RPM ranges. I'm not asking anyone to offer me a course on how D-Jet works just trying to make sense to answers to questions I've asked. <br></div><div><br></div><div> I realize the Auto trans load is going to drop the engine RPM it's a load and nothing like modern FI systems where that load is compensated for you might see the drop for a second. Or like some older cars with a throttle kicker . Before I did all this work the RPM drop was not so drastic . All the Bentley states is what an auto trans engine RPM should be not how to actually set it , simple on a standard trans. I set mine @1000 warmed up and AAR closed in my case plugged since I can't trust it's fully closed I guess all I can do is lower the idle to 900 or a bit more it was not so drastic before when set lower. <br> </div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Fri, Jun 7, 2019 at 8:18 AM Jim Adney <<a href="mailto:jadney@vwtype3.org">jadney@vwtype3.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">On 6 Jun 2019 at 15:09, William Jahn wrote:<br>
<br>
> Does this mean @ idle all that tells the ECU to fire the injectors are the<br>
> trigger points?<br>
<br>
no<br>
<br>
> I am trying to figure out how this works since my idle<br>
> because of the AAR is 1300 RPM in park and 1000 in drive. <br>
<br>
There's really no mystery as to why the rpms are lower under load than <br>
without load.<br>
<br>
> I thought once<br>
> you let off the gas due to the 2 way switch once you let off the gas then<br>
> that switch cuts off all the functions of the enrichment didn't know it was<br>
> RPM dependent.<br>
<br>
The @ idle switch has nothing to do with enrichment. In the idle position, the <br>
enrichment contacts are not in use.<br>
<br>
> Did you ever get a chance to see<br>
> what your 73 does with that sensor unplugged?<br>
<br>
No, sorry, too many other things on my plate for that to rise to the top.<br>
<br>
> Maybe the gradual rise is the time it takes for the MPS to adapt to<br>
> the vacuum change.<br>
<br>
There's a spring loaded flapper valve in the MPS inlet that alters the MPS <br>
response time depending on whether air is trying to get in or get out. The <br>
delay on opening the throttle is less than on closing. I'm guessing they are <br>
on the order of 0.5 sec and 3 sec. I don't think there's any measurable <br>
response time in addition to that.<br>
<br>
-- <br>
*******************************<br>
Jim Adney, <a href="mailto:jadney@vwtype3.org" target="_blank">jadney@vwtype3.org</a><br>
Madison, Wisconsin, USA<br>
*******************************<br>
<br>
_______________________________________________<br>
VWType3.Org mailing list - <a href="mailto:type3@vwtype3.org" target="_blank">type3@vwtype3.org</a><br>
To unsubscribe or change subscription options, visit:<br>
<a href="http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org" rel="noreferrer" target="_blank">http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org</a><br>
If you need more help, contact: <a href="mailto:gregm@vwtype3.org" target="_blank">gregm@vwtype3.org</a><br>
</blockquote></div>