<div dir="ltr">On your 73 you have the proper MPS and ECU and removed the EGR and have not tampered with the MPS and yours runs fine . I have the same components  and mine is nothing other than a never ending battle . Yes I rebuilt my engine yet didn't change the cam or crank or do any modifications just the pertronix if I had the funds I would try another ECU. My TS1 drops to 65 ohm when the engines hot , in the past I never checked what they read , it ran fine so I was not looking to find fault. So far on Samba all I find is letting the car sit 30 minutes after it hot the TS1 drops to low in my case 65 Ohm and due to heat soak it might come up to 100 ohm making it to lean and this is the reason the idle is low then recovers , it does recover meaning the idle comes back up after the engine heats up . I never had this issue before. I;ll check the AAR . I know it does not stick closed and it does close when hot and the heater works it seems to close fairly fast when I  start it cold and just let it idle. It does close faster when no air is flowing through it that seems to cause it to take longer to close. Like air flow through a radiator. The air goes through the open valve so it cools the valve and the valve stem has the thermal spring on it.  <br></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Wed, Oct 2, 2019 at 7:09 AM Jim Adney <<a href="mailto:jadney@vwtype3.org" target="_blank">jadney@vwtype3.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">On 1 Oct 2019 at 15:52, William Jahn wrote:<br>
<br>
>  Here's the link to the AAR not my photo's , scroll  down to Rays it shows<br>
> the pin and stop and why you can't get the spring on wrong.<br>
> <br>
> <a href="https://www.thesamba.com/vw/forum/viewtopic.php?t=610070&highlight=aar" rel="noreferrer" target="_blank">https://www.thesamba.com/vw/forum/viewtopic.php?t=610070&highlight=aar</a><br>
<br>
Okay, I see it. So it must be positioned right. Now it's time to do the <br>
functional tests that I recommended to see if your AAR is doing what you <br>
think it's doing.<br>
<br>
-- <br>
*******************************<br>
Jim Adney, <a href="mailto:jadney@vwtype3.org" target="_blank">jadney@vwtype3.org</a><br>
Madison, Wisconsin, USA<br>
*******************************<br>
<br>
_______________________________________________<br>
VWType3.Org mailing list - <a href="mailto:type3@vwtype3.org" target="_blank">type3@vwtype3.org</a><br>
To unsubscribe or change subscription options, visit:<br>
<a href="http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org" rel="noreferrer" target="_blank">http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org</a><br>
If you need more help, contact: <a href="mailto:gregm@vwtype3.org" target="_blank">gregm@vwtype3.org</a><br>
</blockquote></div>