I replaced the sound deadning material with some stuff I got from Lowes. It's called quiet-seal I think, comes on a roll about 18 inches wide, has a self stick rubber side and aluminum foil on the other. Sort of like a poor man's version of dyna-mat.  <div id="yMail_cursorElementTracker_1583764937368">I think the little clip pieces you need are common...ISP West or your favorite provider may have..</div><div id="yMail_cursorElementTracker_1583765045321"><br id="yMail_cursorElementTracker_1583764570475"><br><div id="ymail_android_signature">LarryT</div> <br> <blockquote style="margin: 0 0 20px 0;"> <div style="font-family:Roboto, sans-serif; color:#6D00F6;"> <div>On Sun, Mar 8, 2020 at 5:05 PM, Jeff C</div><div><knowonelse@gmail.com> wrote:</div> </div> <div style="padding: 10px 0 0 20px; margin: 10px 0 0 0; border-left: 1px solid #6D00F6;"> <div dir="ltr">I took apart my doors to access the window mechanisms to get them to move<br></div><div dir="ltr">properly and discovered a few things out of the ordinary.<br></div><div dir="ltr">The thick asphaltish material used as sound deadening slumped down and fell<br></div><div dir="ltr">completely off of the panel on the left side. The plastic covering appeared<br></div><div dir="ltr">to be original. The little clip that the door card fits onto had rusted and<br></div><div dir="ltr">fell off. I pop-riveted it back on.<br></div><div dir="ltr">The right side sound deadening material was completely missing. I was<br></div><div dir="ltr">obvious that I had been in the right side before as the plastic was torn<br></div><div dir="ltr">and re-glued into position.<br></div><div dir="ltr">All of the mechanisms work well after being lubricated!<br></div><div dir="ltr">However what recommendations do folks have to use in place of the original<br></div><div dir="ltr">sound deadening material? Lots of glue left on the inside of the door.<br></div><div dir="ltr">Are the small plastic/rubber pockets that the door clips fit into in the<br></div><div dir="ltr">metal door available?<br></div><div dir="ltr">The vinyl is intact but the door card is warped both sides, so I think I'll<br></div><div dir="ltr">make a new backing from masonite.<br></div><div dir="ltr">The vinyl has obtained some bumps and twists from distortion over time. Has<br></div><div dir="ltr">anyone had luck moving the material back to position?<br></div><div dir="ltr">Thanks! Jeff '67 Sqbk<br></div><div dir="ltr">-------------- next part --------------<br></div><div dir="ltr">An HTML attachment was scrubbed...<br></div><div dir="ltr">URL: <<a href="http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20200308/753e7f43/attachment.html" target="_blank">http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20200308/753e7f43/attachment.html</a>><br></div><div dir="ltr">_______________________________________________<br></div><div dir="ltr">VWType3.Org mailing list - <a ymailto="mailto:type3@vwtype3.org" href="mailto:type3@vwtype3.org">type3@vwtype3.org</a><br></div><div dir="ltr">To unsubscribe or change subscription options, visit:<br></div><div dir="ltr"><a href="http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org" target="_blank">http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org</a><br></div><div dir="ltr">If you need more help, contact: <a ymailto="mailto:gregm@vwtype3.org" href="mailto:gregm@vwtype3.org">gregm@vwtype3.org</a><br></div> </div> </blockquote></div>