<div dir="ltr"><div>I checked my MPS the coils are fine and neither has a short to ground. Yesterday I used a hand vacuum pump and it held fine. Trouble is since I did the vacuum test it does not run like it did before. Now while driving it bogs down like flat spots . Before it only had an issue at idle no load and if I unplugged TS1 it would idle fine and run fine . Now even with TS1 unplugged it seems better but nothing like before. <br></div><div><br></div><div> Is there a limit on how much vacuum one can apply to the MPS on an E system , I went up to a bit over 20 inches of vacuum. <br></div><div><br></div><div> William<br></div></div>