<div dir="ltr">I found this link trying to see what the pivots look like. I imagine VW is similar except the VW does not have e clips , so who knows. Appears to me that if MB does not have an actual metal pivot inside the fiber rubbing block then VW would not . It might be due to expansion rates between any metal sleeve pressed  into a fiber block the block might split. Or the metal pin might seize. just guessing not an engineer. Nevertheless they lasted a good long time. This set I am using is so I can rebuild a second dist to have a spare and save the trigger points which the plastic rubbing blocks just in case.  <br></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sun, Sep 11, 2022 at 5:13 PM William Jahn <<a href="mailto:willjahn975@gmail.com">willjahn975@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr"><div>This is the classified photo of the NOS Bosch trigger points <br></div><div><br></div><div><a href="https://www.thesamba.com/vw/classifieds/detail.php?id=2467652" target="_blank">https://www.thesamba.com/vw/classifieds/detail.php?id=2467652</a></div><div><br></div><div> The set Tram set is identical.<br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sun, Sep 11, 2022 at 5:05 PM William Jahn <<a href="mailto:willjahn975@gmail.com" target="_blank">willjahn975@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr"><div>The set Tram set me is Bosch. I'm certain I found photos on Samba classified sellers in the UK. Tram doesn't have knock off  parts.  The other set has black plastic rubbing blocks , the one with the wear on the plate which is bent up at the ends. <br></div><div><br></div><div> I was able to get the rust off with a toothpick. <br></div><div> Any suggestions on the type of oil for the pivots? I'm not sure if there is a metal sleeve inside the fiber rubbing blocks or if it's just fiber and the metal washer on top and looks like a large red fiber washer at the base end.<br></div><div><br></div><div> <br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sun, Sep 11, 2022 at 3:39 PM Jim Adney <<a href="mailto:jadney@vwtype3.org" target="_blank">jadney@vwtype3.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">On 11 Sep 2022 at 15:09, William Jahn wrote:<br>
<br>
> Jim :<br>
>  Does it look like both sets are Bosch?  I don't know if the wear on the<br>
> set that was in the used 73 dist I got was from that dist because that dist<br>
> does not have much up/down play . I have not taken it apart to know if the<br>
> upper shims in the trigger cam are worn.<br>
<br>
Oddly, Bosch did not put their logo on any of these. Yours both look like <br>
Bosch to me, but I can't say for sure.<br>
<br>
>  The set Tram sent me has a bit of rust on the face and back side on the<br>
> one side , it's on the metal part where the point contacts are . I got most<br>
> of it off using a toothpick. I just don't want rust getting in the lube on<br>
> the cam. I don't know a better way to do this. Should the pivots be lubed ?<br>
<br>
I oil the pivots and put grease on the cam and rubbing blocks. You could try <br>
a small wire brush for the rust, and maybe add some oil or grease on the <br>
rusty areas to prevent future rust.<br>
<br>
<br>
-- <br>
*******************************<br>
Jim Adney, <a href="mailto:jadney@vwtype3.org" target="_blank">jadney@vwtype3.org</a><br>
Madison, Wisconsin, USA<br>
*******************************<br>
<br>
_______________________________________________<br>
VWType3.Org mailing list - <a href="mailto:type3@vwtype3.org" target="_blank">type3@vwtype3.org</a><br>
To unsubscribe or change subscription options, visit:<br>
<a href="http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org" rel="noreferrer" target="_blank">http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org</a><br>
If you need more help, contact: <a href="mailto:gregm@vwtype3.org" target="_blank">gregm@vwtype3.org</a><br>
</blockquote></div>
</blockquote></div>
</blockquote></div>