<div dir="ltr"><div> I was able to get the drive dog pins out of both the AJ and AG, the AJ was much more difficult and its drive dog has some dings on both the two ears or whatever they are called. One the AG it came out easy and the dog looks great. Now all I need to do is see which parts make the best unit. <br></div><div><br></div><div> I did notice the notch for the vacuum can is larger on the AJ. Yet the single can from the AH and AG fit the hole spacing perfectly. <br></div><div><br></div><div> Also the advance plate that came on the AH has the ball with the spring steel cover that's not screwed on , it slips on with a built in clip part of the spring steel piece. I could not use that plate with the pertronix because the ground braid is short , it works fine with points. The AG has the screw type. <br></div><div><br></div><div> Now I know why when I had the AJ in my car why it suddenly began to ping. Once I took it apart in the trigger cam recess it had a steel shim then a fiber washer then another steel shim . I imagine you need a steel shim to ride on the upper bushing. Now on the base where the drive dog is there was only an old broken fiber washer and no steel shims, from what I recall on the dist bottom should be a fiber washer first then enough steel shims to get the end play right. As for the pinging, one fiber washer under one weight pivot was gone and the weight was dragging. Some breakdowns I see show an E clip on top of each weight , all three of mine use the springs to secure the weights. I have no idea if this is what they did in later years.  <br></div><div><br></div><div> The AG was the same way in the trigger cam recess. It also is missing one fiber washer under one weight and had only one broken fiber on the body above the dog and no steel shims. <br></div><div><br></div><div> Let me know how the lower end above the dog is supposed to be. I read fiber first then steel shims. I'm pretty sure that's how I did the AH when I rebuilt it in 2009. <br></div><div><br></div><div>William <br></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Tue, Sep 13, 2022 at 6:38 AM Jim Adney <<a href="mailto:jadney@vwtype3.org" target="_blank">jadney@vwtype3.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">On 12 Sep 2022 at 17:01, William Jahn wrote:<br>
<br>
> I'm just trying to rebuild the 73 AG I got which is for a standard trans.<br>
> What I am not certain of is if the two mechanical springs need to be<br>
> replaced because of age. Plus the two fiber washers the weights sit on.<br>
> The AH was in real great shape when I rebuilt it and I used the old fiber<br>
> washers for the weights . Yet I read both should be replaced.<br>
<br>
You should stick with an AT distributor for your AT car. I can trade you in the <br>
course of a rebuild if that helps.<br>
<br>
I replace the fiber washers if the OE ones have broken, otherwise just use <br>
the originals. Keep the OE springs, or you have to redo the advance curve, <br>
which requires a distributor machine. I put a bit of grease on the springs to <br>
prevent rust, which could cause small changes in the spring constant.<br>
<br>
-- <br>
*******************************<br>
Jim Adney, <a href="mailto:jadney@vwtype3.org" target="_blank">jadney@vwtype3.org</a><br>
Madison, Wisconsin, USA<br>
*******************************<br>
<br>
_______________________________________________<br>
VWType3.Org mailing list - <a href="mailto:type3@vwtype3.org" target="_blank">type3@vwtype3.org</a><br>
To unsubscribe or change subscription options, visit:<br>
<a href="http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org" rel="noreferrer" target="_blank">http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org</a><br>
If you need more help, contact: <a href="mailto:gregm@vwtype3.org" target="_blank">gregm@vwtype3.org</a><br>
</blockquote></div></div>