[T3] 67 subframe

Dennis Stiefel dlstiefel at dekalbk12.org
Thu Dec 30 19:10:42 PST 2010


I've been thinking about putting the torsion out of the SB I have for a
parts car in my FB while I have everything a part.

Dennis Stiefel
Rainsville AL, USA

-----Original Message-----
From: type3-vwtype3.org-bounces at lists.vwtype3.org
[mailto:type3-vwtype3.org-bounces at lists.vwtype3.org] On Behalf Of Keith Park
Sent: Thursday, December 30, 2010 8:10 PM
To: type3 at vwtype3.org
Subject: Re: [T3] 67 subframe

I have squareback rear bars in my Notch IRS conversion, YES, you do feel
stiffer but it handles better too... so long as you don't lower it!  :-)

Not sure if it's a fair comparison to doing the same with swing though...

Keith


Top Notch Restorations
topnotch at nycap.rr.com 
http://www.a383ina68.addr.com/radiorest/main.htm
71 Squareback "Hothe"
65 Notchback "El Baja Rojo"
65 Squareback "Eggcrate"
87 golf "Winterat"
93 RX7 "Redstur"


-----Original Message-----
From: type3-vwtype3.org-bounces at lists.vwtype3.org
[mailto:type3-vwtype3.org-bounces at lists.vwtype3.org] On Behalf Of SAW DUST
Sent: Thursday, December 30, 2010 8:39 PM
To: VW TYPE 3 dot org
Subject: Re: [T3] 67 subframe


I think i might install new torsion bars anyway. I have a Notch actually but
a stiff ride in the back would be good. I plan on towing a tear drop trailer
from time to time. Thanks for the tip!  











SAWDUST


> From: jadney at vwtype3.org
> To: type3 at vwtype3.org
> Date: Thu, 30 Dec 2010 16:06:03 -0600
> Subject: Re: [T3] 67 subframe
> 
> On 29 Dec 2010 at 20:03, SAW DUST wrote:
> 
> > I just did a little clean up on my subframe and I discovered that It
> > has some serious rust going all the way through the cross support .
> > Needless to say, I need to find another one. If you know of anyone
> > that has one, I need it.  Im in San Diego, if there's one close, that
> > would be best. 
> 
> If you find another subframe, if you have a Squareback, make sure 
> that the replacement subframe is also from a Squareback. Squareback 
> torsion bars are stiffer and you don't want the lighter bars in a 
> Squareback.
> 
> -- 
> *******************************
> Jim Adney, jadney at vwtype3.org
> Madison, Wisconsin, USA
> *******************************
> 
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> Contact gregm at vwtype3.org if you need help with the list.
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.vwtype3.org/private.cgi/type3-vwtype3.org/attachments/20101230
/5813b476/attachment.htm>
_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm at vwtype3.org if you need help with the list.

_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm at vwtype3.org if you need help with the list.

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.




More information about the type3-vwtype3.org mailing list