[T3] Fan motor

[Jim Adney]

On 29 Nov 2010 at 9:56, Tim Keohane wrote:

> I removed my fresh air housing and fan, to reseal the housing and  
> lubricate the bearings. What I found was the blades on start up make  
> contact (ever so slightly) with the housing, until they generate  
> enough speed ( a few seconds ) then they self center, and the noise/ 
> squeal stops. 

I don't think I've seen this problem before. Can you tell what 
exactly the fan is hitting? Is it hitting something outside the fan 
or something inside the fan?

-- 
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************