[T3] wiggle test for stabilizer bar

[Jim Adney]

On 9 Feb 2011 at 13:14, Bryon Garvin wrote:

> I was reading in the archives and looking in the Bentley about the test for
> the upper torsion arm being loose on the left side.  I went to the LF and
> tried to move the tire by grabbing it at the top.  Didn't seem to move.  I
> went to the RF and did the same.  It felt and sounded like it was loose.  If
> this was only happening on the right and not the left, it would be the wheel
> bearing, correct?

Right.

-- 
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************