[T3] Putting door seal on

[Bobsnotch at aol.com]

In a message dated 1/1/2011 1:59:27 P.M. Eastern Standard Time,  
spinningrooves at gmail.com writes:

Hi all  -

I'm putting a door seal on tomorrow.  I have 3m weather strip  adhesive.
08011 black.  Is that the right stuff to do it  with?

Also its about 38 around here.  Is that going to be a  problem?  The box
doesn't caution against  temperatures.




Sounds right. As for temps, that 38 could be a little on the cold side, as  
most adhesives like temps above 70 degrees. You might have to add some  
masking tape to hold the seal in place, and then let it dry overnight. If  
they're going on, and not coming back off, put the glue on both the seal, and  
the door. Let them both tack up 5 minutes or so (due to colder temps), and  
stick it together. I hope this helps.  

Bob 65 Notch  S with sunroof and IRS (Krusty)
71 Notch (Krunchy)
64 T-34 Ghia  (Wolfie)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/private.cgi/type3-vwtype3.org/attachments/20110101/50762ee8/attachment.htm>