[T3] Putting door seal on

[Bryon Garvin]

Ok, thanks.  That makes me want to wait.  But I have a leak that I want to
stop, so that's why I'm considering doing it now.  It's just not usually dry
for long around here (Oregon) so I was considering taking advantage of that
since I don't have a garage.

Might wait for a warmer day.  Thanks for the info.

BTW - I bought the door seals from ISP.  Made in the USA ones, not German.
 I'll let you all know how they work out.

 - Bryon, '71 Fastback

On Sat, Jan 1, 2011 at 11:32 AM, <Bobsnotch at aol.com> wrote:

>
> In a message dated 1/1/2011 1:59:27 P.M. Eastern Standard Time,
> spinningrooves at gmail.com writes:
>
> Hi all  -
>
> I'm putting a door seal on tomorrow.  I have 3m weather strip  adhesive.
> 08011 black.  Is that the right stuff to do it  with?
>
> Also its about 38 around here.  Is that going to be a  problem?  The box
> doesn't caution against  temperatures.
>
>
>
>
> Sounds right. As for temps, that 38 could be a little on the cold side, as
> most adhesives like temps above 70 degrees. You might have to add some
> masking tape to hold the seal in place, and then let it dry overnight. If
> they're going on, and not coming back off, put the glue on both the seal,
> and
> the door. Let them both tack up 5 minutes or so (due to colder temps), and
> stick it together. I hope this helps.
>
> Bob 65 Notch  S with sunroof and IRS (Krusty)
> 71 Notch (Krunchy)
> 64 T-34 Ghia  (Wolfie)
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.vwtype3.org/private.cgi/type3-vwtype3.org/attachments/20110101/50762ee8/attachment.htm
> >
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> Contact gregm at vwtype3.org if you need help with the list.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/private.cgi/type3-vwtype3.org/attachments/20110101/c747bde8/attachment.htm>