[T3] Vacuum Leak

[Adriel Rowley]

First, a major thank you to P.A. for his assistance the last two days.  

I found a vacuum leak in the area of the manifold at the cylinder head.  I have the proper F.I. gasket, and new injectors on the same side.  I have to leave in five minutes, so just wanted to get this out there, and ask more questions later. ;)  I noticed one of the seals was pinched on one side, so I gather it was not seated right.  However, this is not the cylinder that was running way over rich, but the same bank.  Could this be the reason for the leak?  any other reasons/possibilities? 


Thank you,
Adriel