[T3] Torque
Dave Hall
dave at hallvw.clara.co.uk
Sun Oct 9 17:43:13 PDT 2011
5 lb.ft according to a manual I have, but I bet I don't do them that tight.
Probably no more than half that.
Dave.
UK VW Type 3&4 Club
===================
-----Original Message-----
From: type3-vwtype3.org-bounces at lists.vwtype3.org
[mailto:type3-vwtype3.org-bounces at lists.vwtype3.org] On Behalf Of Gary
Forsmo
Sent: 07 October 2011 23:40
To: type3 at vwtype3.org
Subject: [T3] Torque
*I asked Jim A. if there was a torque spec for the 6, nuts that hold the oil
sump plate/gaskets/filter screen to the engine case. I searched the
Bentley book, but couldn't seem to find anything. Did I miss it?
Jim said: "I just use a small ratchet with a socket and put my hand around
the head of the wrench." That decreases the amount of torque you can apply.
But being the A/R that I am, I would still like to see and use a
specification.
Somebody told me "Just tighten them enough so it doesn't leak."
It must be inch pounds ... but what is it?
Gary "Frito" - '69 Variant, FI, MT
Lake Geneva, WI
*
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.vwtype3.org/private.cgi/type3-vwtype3.org/attachments/20111007
/abe6c3e0/attachment.htm>
_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm at vwtype3.org if you need help with the list.
More information about the type3-vwtype3.org
mailing list