[T3] Passenger side mirror

Mike Fisher fisherfarms at gmail.com
Tue Oct 18 15:17:48 PDT 2011


MAM/Jbugs etc sell a T1 nutplate that works for T3's also.  Be sure to
weld it in while you can or it falls down inside your door panel every
time you take your mirror off!  BTDT  square/fasty doors are the same.

On Tue, Oct 18, 2011 at 2:47 PM, Jesse Hernandez <spendthrift9 at gmail.com> wrote:
> Hello all,
>
> I am getting ready for paint and removal of windows, doors and fenders,
> replacement of rubber on my '67 Fastback.  Since the car will be apart, I
> want to add passenger side mirror, and will be drilling the hole.  I recall
> the earlier posts regarding the procedure.  I have been to a couple of
> hardware stores but they did not have the correct size nut.  I know I am
> only going to get one shot at this, and want to be careful.  Does anyone
> have the correct size nut?  Also, is a '67 Squareback door inter-changeable
> with a Fastback door?  Thank you.
>
> Jesse
> '67 Fastback
>
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> Contact gregm at vwtype3.org if you need help with the list.
>



-- 
http://s169.photobucket.com/albums/u236/mr_bojangles500/



More information about the type3-vwtype3.org mailing list