[T3] First week of school new video

[charles tupper]

Dennis,
Without going through the thread of emails.  Did you find a gasket or tin?  If not, let me look through my T3 boxes.  Will get back to you.

Charlie


________________________________
 From: Dennis Stiefel <dlstiefel at dekalbk12.org>
To: type3 at vwtype3.org 
Sent: Monday, August 27, 2012 2:44 PM
Subject: Re: [T3] First week of school new video
 



>You can wrap that narrowed section with a thin alum strip until  it's large
enough that the muffler donut is tight around it. Cut it into strips just a
little wider >than the donut. Wrap it tight, so it won't crush much. I use
thin alum flashing sheet and I also have some much thicker than normal alum
foil. Standard alum >foil doesn't hold up well. If you do this at the same
time as you install the muffler, you can also put some muffler paste in
there, but muffler paste by itself >won't hold up.



>This is one of those places that I use a Hi-Temp silicone, like "Ultra
Copper" from Permatex. It might not be the "correct way" to fix this, but it
does work. : )  

>Bob 65 Notch  S with sunroof and IRS (Krusty)
>64 T-34 Ghia  (Wolfie)

We have fixed now. We just took our wire welder and filled in the low spots
then grinded it down smooth and even to where the doughnut gasket fits snug.

Dennis 

_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm at vwtype3.org if you need help with the list.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/private.cgi/type3-vwtype3.org/attachments/20120828/1fad9a4a/attachment.htm>