[T3] FI Problem

[Jonathan Stiles]

Robert,

First step, make sure your injector trigger wire is hooked up to the ( - )
side of the coil or that the trigger wire is not damaged. It is easy to
plug it into the wrong spade on the coil.

Jon Stiles

On Tuesday, August 28, 2012, Robert Rogers wrote:

> Jim,
>
> I’m working on a 1978 Type 1 FI system.  I need your expertise.
>
> If I spray starting fluid into the air intake, the car will start and run
> until the fluid is depleted.
>
> Fuel is getting to the injectors.  However, when the engine is cranked,
> there is no spray from the injectors.  The injectors are new.
>
> How do I check to determine if the injector wires are providing a signal
> to open the injectors—check for voltage at the end of the injector wires
> while the engine is cranked?
>
>
> ________________________________________
> PeoplePC Online
> A better way to Internet
> http://www.peoplepc.com
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org <javascript:;>
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> Contact gregm at vwtype3.org <javascript:;> if you need help with the list.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/private.cgi/type3-vwtype3.org/attachments/20120828/5bd4dadf/attachment.htm>