[T3] water dripping on cold start
Bryon Garvin
spinningrooves at gmail.com
Mon May 7 09:26:13 PDT 2012
>
>
>
> The "forward end of the rear heat exchanger"? That would be where the
> rear heat exchanger bolts to the exhaust port on the head. Is that
> what you mean?
>
yes.
>
> > I know that water is a byproduct of combustion, but this seems like a
> lot.
> > Any ideas what I'm seeing? Is there water getting into the system
> > somehow? Or is this normal but maybe some of my junctions aren't as
> tight
> > or sealed as they should be?
>
> One thing to
> check would be to make sure the drain hole in the bottom of the fan
> housing, at the center of the parting line of the housing halves, is
> clear. That hole is about 3/16" diameter and often gets clogged with
> debris in an old engine.
Ok, will check on that. Thanks.
Subsequent starts on dry days this past week have yielded no water. So I
believe it's the rain getting in somehow.
- Bryon, '71 Fastback FI/MT
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/private.cgi/type3-vwtype3.org/attachments/20120507/3d0a8d72/attachment.htm>
More information about the type3-vwtype3.org
mailing list