[T3] Carburetor Intake Gaskets

Dave Hall dave at hallvw.clara.co.uk
Wed Nov 14 03:53:49 PST 2012


The manifold arrangements for twin carb are heer:-
http://home.clara.net/hallvw/type3/T3pbo/T3pb1-64.htm

The thermal break for twin carb arrangements is number 31 in the picture -
not as thick as the FI, and placed below the carb.

Dave
UK VW Type 3&4 Club
===================


-----Original Message-----
From: type3-vwtype3.org-bounces at lists.vwtype3.org
[mailto:type3-vwtype3.org-bounces at lists.vwtype3.org] On Behalf Of Jim Adney
Sent: 14 November 2012 02:24
To: type3 at vwtype3.org
Subject: Re: [T3] Carburetor Intake Gaskets

On 13 Nov 2012 at 17:55, Brion Sabbatino wrote:

> On the subject of solex duel carburetor intake gaskets. Working on my 
> Square today. Removed my number 3,4 head. That is another post.
> Putting it all back together now. Is this what I should be doing.
> Install cylinder head. Install thin paper gasket, phenolic spacer, 
> paper gasket, carburetor? If yes, I can make up the thin gaskets and I 
> am good to go. Sorry, I only have the later Bentley and it does not 
> cover the early duel carburetor vehicles. Thanks everyone.

Dual carb engines only got a paper gasket between the intake manifold and
the head.

The thicker phenolic spacer was only used there on FI engines.


--
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************

_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm at vwtype3.org if you need help with the list.




More information about the type3-vwtype3.org mailing list