[T3] E10

[Jim Adney]

On 8 Oct 2012 at 19:38, topnotch at nycap.rr.com wrote:

> with the engine cold, pull off the air cleaner, rotate the rubber
> elbow so it faces up. start the engine and after a few seconds when its
> still cold carefully start to pour SLOWLY the marvel into the elbow,
> when the engine starts to load down a bit shut it off just as you stop
> pouring, (I pull the plug out of the trigger points) this way fresh
> marvel stays on the back side of the intake valves and is not
> evaporated off from a hot engine.  let it sit overnight at minimum,
> then just connect everything back up and start and drive as normal in
> a day or 2. 

I would think that this risks fouling the plugs, making it hard to 
start the next time. Have you ever had any trouble like that?

-- 
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************