[T3] Mystery Wires

[Bobsnotch at aol.com]

In a message dated 9/19/2012 9:22:40 P.M. Eastern Daylight Time,  
dlstiefel at dekalbk12.org writes:

Some of  you guys may not approve how I am putting on this harness but I do
it this  way sometimes with FI and engine management systems on modern cars
and it  works out ok.  Since we had the FI harness off for the paint job  I
decided to install it on the engine before we install the it in the car  
then
slip the part of the harness that plugs up to the ECU through the hole  that
goes in the part where the brain is  mounted. 


Actually I prefer that method as well. It allows you to be able to get to  
everything. Keep in mind that you have to remove the small cover on the  
harness (with the 2 screws) to get the connector to fit thru the hole.  

Bob 65 Notch  S with sunroof and IRS (Krusty)
64 T-34 Ghia  (Wolfie)
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/private.cgi/type3-vwtype3.org/attachments/20120920/8f02a5d5/attachment.htm>