[T3] Mystery Wires

[Jim Adney]

On 20 Sep 2012 at 15:40, Dennis Stiefel wrote:

> I found a diagram that seems to match up better with what we have than
> what the Bentley showed.  The two behind the generator.  One goes to
> the temperature sensor on the head and the other goes to one of the
> other two wires that comes out around the wires that goes to the
> pressure sensor so I guess that wires goes where there is a place for a
> ground on that sensor and where it comes out behind the generator it
> needs to be grounded on the top of the crank case. 

Not sure I've following this very well. Just don't ground one of the 
wires bring FI power into the LR corner of the engine compartment.

> That leaves me with that last wire that is tied to the thermo switch
> wire. From what I have read from other post here and manuals it is part
> of the cold start set up and I have seen more than one person say on
> here not hook up this part of the system. 

Yes, you can just ignore the CS system, and leave it disconnected.

-- 
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************