[T3] Engine bolted in

[Jim Adney]

On 27 Sep 2012 at 19:59, Dennis Stiefel wrote:

> We are making baby steeps here.  This morning done a dry run and spun the
> engine over several times with no fuel  going in it and an oil pressure gage
> hooked up. It took several spins (didn't want to overheat the starter) but
> she finely pumped up about 30 PSI on the oil pressure. Just before the
> students left we hooked the brain up and tried spinning it over a few times
> but no offers to hit a lick. 

Jumper around the fuel pump relay, which will let the fuel pump run 
with nothing else going on. That will flush out the system and sweep 
it clear of any air. A few pumps of the throttle while the pump is 
running will also fill the injectors.

Then try to start it.

-- 
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************