[T3] distributor drive gear

[Mike Fisher]

Rotate your plug wires on the cap clockwise or counter clockwise, so your
vacuum can doesn't hit.


On Wed, Apr 17, 2013 at 9:54 AM, ken2k <ken71type34 at yahoo.com> wrote:

> as i mentioned earlier, i had to set TDC for #3 in order to insert the
> drive gear correctly, ie with the small inset half toward the front at what
> looks to be 60degrees. the problem is the vacumn can is at 2 oclock and is
> hitting the fuel pump so the timing mark is at about 10 oclock and i cant
> rotate the distributor anymore.  i also noted the rotor isnt directly under
> the contacts in the cap but is about in the middle between the two.
> help!!   kk
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20130417/aba81a8d/attachment.htm
> >
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> Contact gregm at vwtype3.org if you need help with the list.
>



-- 
Eugene, Oregon

http://s169.photobucket.com/albums/u236/mr_bojangles500/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20130417/53a94644/attachment.htm>