[T3] Installing right side mirror

[Keith Park]

I have one available here in NY, if your nearby.

Keith


I'm sure the Squarebacks had two mirrors back then, but you would be looking
for a pre-'66 car to get the 3-bolt hinges.  There can't be too many of
those that side of the pond! Canada maybe?

I would think welding in the plate with nut would be a far easier way, as
has been suggested.  

Dave
UK VW Type 3&4 Club
===================

-----Original Message-----
From: type3-vwtype3.org-bounces at lists.vwtype3.org
[mailto:type3-vwtype3.org-bounces at lists.vwtype3.org] On Behalf Of Jim Adney
Sent: 17 December 2013 20:43
To: type3 at vwtype3.org
Subject: Re: [T3] Installing right side mirror

On 17 Dec 2013 at 10:32, SAW DUST wrote:

> I don't remember if '67s have the outer lock cylinder in the handle, 
> like the later cars, or below, like the earlier ones. If it's like the 
> later cars, a good used door should be easy to find. I've got a 
> couple. Early style doors will be harder.
> 
> Ya, I have an early door. The lock is separate, below the handle.

In that case it will be harder to find a matching door, and it's possible
that those years didn't ever come with a right side mirror. 
I may have a '66 door here, which should be the same, but it's not close
enough for me to look for a mirror hole.

There are lots of people here more familiar with the early (pre '68) years
than I am.  

Where are you located? Someone here might have doors and fenders for you.

--
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************

_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm at vwtype3.org if you need help with the list.

_______________________________________________
VWType3.Org mailing list - type3 at vwtype3.org
http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
Contact gregm at vwtype3.org if you need help with the list.