[T3] Fuel Hoses
Mike Fisher
fisherfarms at gmail.com
Fri Feb 1 15:52:00 PST 2013
The standard Goodyear/Gates etc 5/16" fuel hose is what we use on fuel
injection. It does make a tighter fit on the injectors etc and require 30+
new hose clamps, but it fits.
On Fri, Feb 1, 2013 at 2:01 PM, J. Jonik <j_jonik at yahoo.com> wrote:
> Is it correct that there is some agreement that Rubber Fuel Hoses are
> better than the braided kind? Or are both just as good?
>
> So, looking for some fuel hose to keep on hand, I found 5/16" rubber hose
> available at local Auto Parts store. It fit a metal piece of fuel hose
> linkage (that I carried around for size) like a tight glove. I didn't
> buy any yet.
>
> BUT...this hose was half again, or more, wider than the braided hose. I
> think that would be a squeeze at a few places...like at the injectors, or
> threaded through the plate at the pump mount....or elsewhere?
> Is there anything to consider about using the fatter rubber fuel hoses?
> And, is 5/16" the generally accepted alternative to the metric size?
>
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> Contact gregm at vwtype3.org if you need help with the list.
>
--
Eugene, Oregon
http://s169.photobucket.com/albums/u236/mr_bojangles500/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20130201/eb2fffd3/attachment.htm>
More information about the type3-vwtype3.org
mailing list