[T3] I think you're gonna like this picture!
Bobsnotch at aol.com
Bobsnotch at aol.com
Sat Feb 16 13:11:26 PST 2013
In a message dated 2/16/2013 3:49:44 P.M. Eastern Standard Time,
jadney at vwtype3.org writes:
Looking on the web, particularly at klockit.com, I don't find
anything listed as "long shaft." Did that refer to the length of the
threaded bushing, or to how far the hand shafts extended out past the
end of the threaded bushing?
I'm afraid that didn't get me anywhere, but I found your thread,
without photos, when I did a google search on long shaft clock kit.
Yes, that refers to the length of the threaded bushing. Walmart sells the
"long shaft", while Kmart sells a "short shaft" clock kit. The short shaft
kit, is too short to work, while the long shaft kit needs a little more
spacing to set the depth right (at least what I've found).
If you search the Samba gallery for Bobnotch, in the type 3 parts and
accessories section, there's a full set of pics there. That was what I was
trying to link to. The pics start about 1/2 way down on page 1, and go to about
1/2 way down on page 2 (where they really start) of 3 pages, or 59
entries. Some of the pics are out of order, due to the way they were loaded into
the gallery.
Bob 65 Notch S w/Sunroof and IRS aka Krusty
64 T-34 Ghia aka Wolfie
71 Square-vert under construction
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20130216/7d236911/attachment.htm>
More information about the type3-vwtype3.org
mailing list