[T3] More FI questions

[Jim Adney]

On 22 Jan 2013 at 21:36, Daniel Nohejl wrote:

> I posted the other day (Saturday?) about Standard Motor Products part #
> HK9314 in response to someone's question regarding connectors,
> wondering if they  were the right part but got no bites. Perhaps now
> that D-Jet connectors are back on the "table", someone could speak to
> whether or not the Standard Motor Products part would be sufficient as
> many of us could stand to replace one or another connector on our
> harnesses. Rock Auto is one of the many places they're available 

I'm pretty sure these will work, but my recommendation would be to 
buy replacement female pins from Keith and crimp/solder them to the 
ends of your remaining wire. That avoids the inline splices that tend 
to come back to haunt most people.

You could go ahead with the Standard parts if your wires are so 
damaged that they would be too short to replace just the female pins. 
If you do this, however, you should solder the splice and cover it 
with heat shrink tubing.

-- 
*******************************
Jim Adney, jadney at vwtype3.org
Madison, Wisconsin, USA
*******************************