[T3] OTT Exhaust Install

[vsnofjohana at hotmail.com]

I just installed  the same system last month. I put them in separate keeping the bolts loose to give me wiggle room till all was in and then tightened  it all down. 
Kirk

> Date: Wed, 10 Jul 2013 09:12:35 -0700
> From: jacob.schroeder at gmail.com
> To: type3 at vwtype3.org
> Subject: [T3] OTT Exhaust Install
> 
> I removed my rusty old EMPI 4 tip exhaust.  It sounded terrible and has
> plagued my shins for 10 years.  I purchased one of the OTT systems from
> ISPWest and am looking forward to installing it this weekend.
> 
> I removed the old EMPI last night and while I'm daydreaming at work about
> my upcoming project, I'm curious if anybody has experience to answer my
> question.  The ISPWest system is 2 pieces -- a header portion and the
> muffler portion.  My engine is still in my car and I hope I can do this
> install without removing my engine.
> 
> Should I install the header portion to my cylinder heads / heat exchangers
> first or should I bolt the two-pieces (header and muffler) together before
> installing to the cylinder heads / head exchangers?
> 
> It is a simple question and I want to poll the forum on the best
> practices.  Thanks in advance,
> 
> Jacob
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20130710/1a3c30f8/attachment.htm>
> _______________________________________________
> VWType3.Org mailing list - type3 at vwtype3.org
> http://lists.vwtype3.org/listinfo.cgi/type3-vwtype3.org
> Contact gregm at vwtype3.org if you need help with the list.
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.vwtype3.org/pipermail/type3-vwtype3.org/attachments/20130710/7c267547/attachment.htm>