[T3] EFI conversion

[Dennis Stiefel]

Hello
My 67 Notch has been sitting for maybe 14 years. My motor is close to being
finished and now has an EFI system installed. 
There has to be 2 fuel lines. I'm going to keep OG fuel line as the return
line and I need to install a new .25" main fuel line. I would like to run
the new fuel line along side the original fuel line through the tunnel. 
   Also, the placement of the Electronic Fuel Pump? I'm guessing close to
the fuel tank but if there is a specific location or bracket / mounting
system that is tried and true. I would like to know.
Has anyone attempted this on their Type3 ? Any insight or direction ? Web
site or tutorials?? Thanks in advance !

Shane "SAW" Schindler
San Diego
67 notch

_______________________________________________
Mine had it originally then it was removed for my dark side days back in the
80s. Now it has it again. Had to have a donor car of the same year to make
it possible.  Although I guess it doesn't madder what year you use since to
my knowledge they didn't make a 67 with fi just make sure it's all from the
same year. The fuel pump sets on the back of the beam housing for the front
suspension on the right under the fuel tank. Got my info here, on the samba
and my Bentley service manual (the brown one).   

Dennis Stiefel
72 Fastback FI MT    
Rainsville, AL